| Subject | Text |
| Require Videocon 400T semi automatic service manual | hi all,
if any one has the information on how to repair or service the Videocon 400 T semi automa |
| Usually, such "cold starting problems" of electronic equipment are due to dried out electr |
|
|
| jitter, jitter not, jitter, Hitachi 61SBX59B | Hey and good day.. I can't think of a better way to describe the problem than the title. If you clos |
| Hitachi V-1150 Oscilloscope problem and cure. | I offer this in the hope it will save someone hours of frustration!
I was delighted to be given a H |
| crt coolant is pretty much clear and it only take one drop to cause problems, Big problem on mitts. |
| Thank you vtech for your help
This is my diagnosis so far:
[b:69e5586ac2]Power Diagnosis[/b:69 |
| Panasonic Shockwave portable CD player... | Hey guys,
I'll be honest, when it comes to electronics, I'm lost. But I'm really hoping to fix my |
| SOLUTION | OK. Its an adm turion laptop with a sis chipset. There is nothing wrong with the motherboard. The pr |
| Terry. You just need to carry the heating trick one step further. If the set comes back on every t |
| creda tvr2 | hi wondered if any one could help with wiring diagram for a creda tvr2 dryer wiring cos while i was |
| RCA Shuts off after 1/2 hour | I have a RCA with CTC203CA6 Chassis. I replaced the flyback due to arching from a pinhole in the sid |
| jitter, jitter not, jitter, Hitachi 61SBX59B | Hey and good day.. I can't think of a better way to describe the problem than the title. If you clos |
| AEG TURBOMAT 16830 | I have a problem on the dryer part of this machine and I am looking for technical information on the |
| Sorry didn't get to finish my reply. If it is still wet then take the board out and flush it under r |
| Mr Gunnell - you were 100% correct! :-)
Afrter reading up on how to desolder old circuit boards, |